Average Reading Speed: Words per Minute and Reading Time
The average reading speed for adults is about 238 words per minute for non-fiction and 260 for fiction. Use the reading time chart to convert any word count.
Updated
The average adult reads about 238 words per minute silently for non-fiction and about 260 words per minute for fiction. Those figures come from a 2019 meta-analysis of 190 studies by Marc Brysbaert. Reading aloud is slower, at about 183 words per minute. At the average silent speed, 1000 words takes a little over 4 minutes.
Where the numbers come from
For years the commonly quoted average was 300 words per minute. Brysbaert's review, published in the Journal of Memory and Language in 2019, pooled 190 studies covering more than 18,000 participants and found that figure was too high. Its estimates for adults reading English are:
- Silent reading, non-fiction: 238 words per minute
- Silent reading, fiction: 260 words per minute
- Reading aloud: 183 words per minute
Fiction is faster mainly because its words are shorter on average, not because people skim it. The review also found a wide normal range: most adults fall somewhere between about 175 and 300 words per minute for non-fiction, depending on the reader and the text.
The reading time formula
Reading time is one division:
- Minutes = word count ÷ words per minute
For a 1,500-word article at 238 words per minute: 1,500 ÷ 238 = 6.3 minutes. To turn the decimal into seconds, multiply the part after the point by 60, so 0.3 of a minute is 18 seconds.
Every reading time calculator and every "5 min read" label on a blog works this way. The only thing that differs is the rate chosen. Common choices are 200 words per minute as a conservative figure, 238 as the research average, and 250 to 275 on some publishing platforms. Medium has said it bases its read times on 265 words per minute.
The Word Counter uses 200 words per minute and rounds to the nearest whole minute, with a minimum of 1 minute. That is deliberately on the cautious side: it suits readers who are not rushing and text that is not light fiction.
Reading time chart
| Word count | Slow (200 wpm) | Average (238 wpm) | Fast (300 wpm) |
|---|---|---|---|
| 500 words | 2.5 min | 2.1 min | 1.7 min |
| 1,000 words | 5 min | 4.2 min | 3.3 min |
| 1,500 words | 7.5 min | 6.3 min | 5 min |
| 2,000 words | 10 min | 8.4 min | 6.7 min |
| 3,000 words | 15 min | 12.6 min | 10 min |
| 5,000 words | 25 min | 21 min | 16.7 min |
| 10,000 words | 50 min | 42 min | 33 min |
| 50,000 words | 4 h 10 min | 3 h 30 min | 2 h 47 min |
| 80,000 words | 6 h 40 min | 5 h 36 min | 4 h 27 min |
| 100,000 words | 8 h 20 min | 7 h | 5 h 33 min |
The last rows are novel lengths. An 80,000-word novel is around five and a half hours of reading at the average non-fiction rate, and a little over five hours at the fiction rate of 260. Typical lengths by genre are in how many words are in a novel.
Silent reading versus reading aloud
The gap between 238 and 183 words per minute matters when you are sizing something to be heard. Audiobooks, podcasts, voice-overs and speeches all move at speaking pace, and a live presentation is slower again because of pauses and audience reaction. For presenting, 130 to 150 words per minute is the usual planning range; the chart in how many words is a 5 minute speech uses those rates.
A quick comparison for 1,000 words:
- Silent reading at 238 wpm: about 4 minutes
- Reading aloud at 183 wpm: about 5.5 minutes
- Presenting at 130 wpm: about 7.7 minutes
What slows reading down
An average is a midpoint, and the same person reads at very different speeds depending on the material.
- Difficulty. Legal text, academic papers and code documentation are read far more slowly than news or fiction, and often reread.
- Familiarity. Readers move faster through subjects they already know because fewer words are new.
- Language. Reading in a second language is slower than in a first.
- Purpose. Studying for an exam is slower than reading for pleasure. Skimming for one fact is faster than both, but it is not reading the whole text.
- Layout. Very long lines, small type and low contrast make text harder to follow. See WCAG color contrast explained for the contrast side of that.
Images, tables and code samples also take time that a word count does not capture, which is why some platforms add a few seconds per image to their estimates.
Can you read much faster?
Speed-reading courses promise rates of 1,000 words per minute or more. A 2016 review of the research by Keith Rayner and colleagues concluded that there is a trade-off between speed and accuracy: pushing far beyond normal rates lowers comprehension, and very high claimed speeds are closer to skimming. Skimming is a useful skill when you only need the gist. It is not a way to take in every sentence in a third of the time.
What does improve reading speed, according to the same review, is practice and vocabulary. People who read a lot recognize more words quickly, so they read faster without losing understanding.
Measuring your own speed
A personal rate is more useful than an average when you are planning study time or a reading list.
- Choose a text of a type you read often and set a timer for 3 minutes. A stopwatch or phone timer works.
- Read at your normal pace, for understanding, and mark where you stop.
- Paste the portion you read into the Word Counter to get its word count.
- Divide the words by 3 to get your words per minute.
Reading 720 words in 3 minutes is 240 words per minute, which is right on the average. Repeat with a harder text and you will get a lower number; use whichever matches the material you are planning for.
Adding a read time to your own writing
For a blog post or newsletter, divide the word count by a rate between 200 and 250 and round to the nearest minute. Round up rather than down: a reader who finishes early is happier than one who was told "3 min read" and needed 5. For limits on titles, descriptions and social posts around the article, see word and character count limits explained.
Try it
Paste any text into the Word Counter to see its word count and an estimated reading time at 200 words per minute. For a different pace, divide the word count by your own rate from the test above.