How to Convert Fraction to Decimal: Chart and Long Division
How to convert fraction to decimal: divide the numerator by the denominator. Includes long division steps, a fraction to decimal chart and inch fractions.
Updated
To convert a fraction to a decimal, divide the numerator (top number) by the denominator (bottom number). For 3/4, 3 ÷ 4 = 0.75. A fraction is a division that has not been carried out yet, so the conversion is always that single step, whether you use a calculator, long division or the chart below.
Fraction to decimal chart
| Fraction | Decimal | Fraction | Decimal |
|---|---|---|---|
| 1/2 | 0.5 | 1/8 | 0.125 |
| 1/3 | 0.3333... | 3/8 | 0.375 |
| 2/3 | 0.6666... | 5/8 | 0.625 |
| 1/4 | 0.25 | 7/8 | 0.875 |
| 3/4 | 0.75 | 1/9 | 0.1111... |
| 1/5 | 0.2 | 1/10 | 0.1 |
| 2/5 | 0.4 | 1/12 | 0.08333... |
| 3/5 | 0.6 | 1/16 | 0.0625 |
| 4/5 | 0.8 | 1/20 | 0.05 |
| 1/6 | 0.1666... | 1/25 | 0.04 |
| 5/6 | 0.8333... | 1/50 | 0.02 |
| 1/7 | 0.142857... | 1/100 | 0.01 |
Three dots mean the last digit or block of digits repeats forever. For 1/7 the whole block 142857 repeats.
Converting with long division
When there is no calculator to hand, long division gives the decimal one digit at a time. The numerator goes inside the division and the denominator outside.
Example: 3/8.
- 8 does not go into 3, so write
0.and treat the 3 as 30 tenths. - 8 goes into 30 three times (24). Write 3. Remainder 6.
- Bring down a zero to make 60. 8 goes into 60 seven times (56). Write 7. Remainder 4.
- Bring down a zero to make 40. 8 goes into 40 five times (40). Write 5. Remainder 0.
The remainder is zero, so the division is finished: 3/8 = 0.375.
Example: 5/6.
- 6 goes into 50 eight times (48). Write 8. Remainder 2.
- Bring down a zero to make 20. 6 goes into 20 three times (18). Write 3. Remainder 2.
- The remainder is 2 again, so every step from here repeats: another 3, then another, forever.
So 5/6 = 0.8333... The moment a remainder shows up for the second time, you know the decimal repeats and which digits form the repeating block.
The shortcut: make the denominator a power of ten
If the denominator divides evenly into 10, 100 or 1,000, scale the fraction instead of dividing.
- 7/20: multiply top and bottom by 5 to get 35/100, which is 0.35.
- 3/25: multiply by 4 to get 12/100, which is 0.12.
- 9/50: multiply by 2 to get 18/100, which is 0.18.
- 3/8: multiply by 125 to get 375/1000, which is 0.375.
Once the denominator is a power of ten, the numerator is the decimal's digits. Shift the decimal point left by the number of zeros.
Will the decimal end or repeat
You can tell before dividing. Reduce the fraction to lowest terms and look at the prime factors of the denominator.
- Only 2s and 5s: the decimal ends. 8 is 2 × 2 × 2, so 3/8 ends. 40 is 2 × 2 × 2 × 5, so 7/40 ends, at 0.175.
- Any other prime factor: the decimal repeats. 6 is 2 × 3, so 5/6 repeats. 7, 9, 11 and 12 all produce repeating decimals.
Simplify first, because a factor can cancel. 3/12 looks like it should repeat, but it reduces to 1/4, which is 0.25.
When you need a repeating decimal as a practical number, round it and say how: 2/3 is 0.67 to two decimal places. To go from a repeating decimal back to its exact fraction, see repeating decimal to fraction.
Inch fractions chart
Rulers, drill bits, wrenches and lumber in the United States are sized in halves, quarters, eighths and sixteenths of an inch. This chart gives each sixteenth as a decimal inch and in millimetres, using the exact definition of 1 inch = 25.4 mm.
| Inches | Decimal inches | Millimetres |
|---|---|---|
| 1/16 | 0.0625 | 1.5875 |
| 1/8 | 0.125 | 3.175 |
| 3/16 | 0.1875 | 4.7625 |
| 1/4 | 0.25 | 6.35 |
| 5/16 | 0.3125 | 7.9375 |
| 3/8 | 0.375 | 9.525 |
| 7/16 | 0.4375 | 11.1125 |
| 1/2 | 0.5 | 12.7 |
| 9/16 | 0.5625 | 14.2875 |
| 5/8 | 0.625 | 15.875 |
| 11/16 | 0.6875 | 17.4625 |
| 3/4 | 0.75 | 19.05 |
| 13/16 | 0.8125 | 20.6375 |
| 7/8 | 0.875 | 22.225 |
| 15/16 | 0.9375 | 23.8125 |
| 1 | 1.0 | 25.4 |
Every value is a multiple of 1/16, which is 0.0625, so you can rebuild the chart by counting up in steps of 0.0625. For other lengths and units, the Unit Converter handles the inch to millimetre step.
Mixed numbers and improper fractions
A mixed number such as 2 3/4 is a whole number plus a fraction. Convert the fraction part and add: 3 ÷ 4 = 0.75, so 2 3/4 = 2.75. In inches, 5 3/8 is 5 + 0.375 = 5.375.
An improper fraction has a numerator at least as large as its denominator, and its decimal is 1 or more. Just divide: 11/4 = 2.75 and 9/5 = 1.8.
Fraction to percent
A percentage is the decimal multiplied by 100. Once you have the decimal, move the point two places to the right: 3/8 = 0.375 = 37.5%, and 1/20 = 0.05 = 5%. This is the usual route for turning a test score like 17/20 into a grade: 17 ÷ 20 = 0.85, or 85%.
Using the converter
The Fraction to Decimal Converter opens on the "Fraction → Decimal" tab. Type a simple fraction like 3/8 or a mixed number with a space, like 2 3/4. It shows the decimal, the percentage and the simplified form, with a copy button on each. For a fraction that is not in lowest terms, such as 6/16, a steps card shows the greatest common divisor it divided by. For a mixed number it also shows the improper fraction.
Decimals are displayed to ten significant digits, so a repeating value is cut off instead of marked: 1/3 appears as 0.3333333333. Use the prime factor test above to know whether the digits you see are the whole story.
For the reverse conversion, see how to convert a decimal to a fraction.
Try it
Enter 5 3/8 in the Fraction to Decimal Converter to get 5.375 and 537.5%, then try 5/6 to see a repeating decimal.