How to Make a Photo Black and White That Looks Good
How to make a photo black and white: apply a grayscale filter, then raise contrast so it does not look flat. Grayscale vs desaturate and contrast tips.
Updated
To make a photo black and white, apply a grayscale filter at 100 percent, then raise the contrast a little so the picture does not look flat. In Image Filters the B&W preset does both in one click, and the sliders let you fine-tune from there. Removing color is the easy part. The steps below explain how to get greys that actually look good.
Make a photo black and white step by step
- Open Image Filters and drop a photo onto the drop area, or click to browse. PNG, JPG, WebP and AVIF files work.
- In the Presets row, click B&W. It sets Grayscale to 100 percent and Contrast to 110 percent. For a darker, moodier look choose Noir, which uses Grayscale 100, Contrast 140 and Brightness 85.
- Under Adjustments, move Contrast and Brightness until the tones look right. Each slider has its own reset.
- Press and hold the Hold to compare button to see the original, then release to see your version.
- Choose a Format (JPG, PNG or WebP), set Quality for JPG or WebP, and click Download.
The download is a new file, so your color original is untouched. Keep it. You can always remove color later, but you cannot put it back.
Grayscale vs desaturate
Both words mean "remove the color", but software can do it in different ways, and the greys come out differently.
A weighted grayscale conversion works out how bright each pixel looks to a human eye. Green looks brightest, red is in the middle and blue looks darkest, so the three channels are not treated equally. A common set of weights is about 21 percent red, 72 percent green and 7 percent blue. A yellow flower stays light and a deep blue sky goes dark, which matches what you expect.
A simple desaturate may average the channels, or take the midpoint of the strongest and weakest channel. With that method pure red, pure green and pure blue all become the same mid grey. Photos converted this way often look muddy, because colors that were clearly different end up with identical tone.
| Method | How grey is calculated | Result |
|---|---|---|
| Weighted grayscale | Channels weighted by perceived brightness | Natural tones, good separation |
| Average | Red, green and blue divided by three | Blues too light, greens too dark |
| Lightness midpoint | Halfway between highest and lowest channel | Saturated colors merge into mid grey |
In Image Filters you can remove color two ways: Grayscale at 100, or Saturation at 0. Both use the brightness-weighted method in the browser, so they give essentially the same result. The difference shows up in other editors, where a command named Desaturate may use the midpoint method. If your conversion elsewhere looks flat, that is a likely cause.
Partial settings are useful too. Grayscale at 60 to 80 percent leaves a hint of color for a muted, faded look.
Contrast is what makes it work
A color photo separates things by hue. A black and white photo only has brightness, so it lives or dies on contrast. After converting, check three things:
- Is there a real black? If the darkest area is only dark grey, the picture looks hazy. Raise Contrast or lower Brightness.
- Is there a real white? If the brightest area is pale grey, the picture looks dull. Raise Contrast.
- Is detail still visible? If shadows have become solid black or skies solid white, you went too far. Step back.
Starting points for the Contrast slider, where 100 means unchanged:
| Subject | Contrast | Brightness | Notes |
|---|---|---|---|
| Portraits | 105 to 115 | 100 | Keeps skin smooth |
| Landscapes | 115 to 130 | 95 to 100 | Brings out clouds and texture |
| Street and architecture | 125 to 140 | 85 to 95 | Strong, graphic look |
| Foggy or soft scenes | 95 to 105 | 100 to 110 | Keep it gentle on purpose |
Treat these as places to begin, then judge with your eyes. Moving Brightness and Contrast together matters: more contrast pushes light areas lighter, so a small drop in brightness often protects the highlights.
Which photos suit black and white
- Strong light and shadow: side-lit faces, late afternoon streets, window light.
- Texture: stone, wood, wrinkles, fabric, fur.
- Shapes and lines: staircases, bridges, silhouettes.
- Distracting or clashing colors: mixed indoor lighting, a bright sign behind the subject.
- Mood: rain, fog, quiet portraits.
Photos that depend on color usually lose their point. A sunset, autumn leaves or a colorful market are about hue, and in grey they become a set of similar mid tones.
A quick test: if two important things in the photo have different colors but similar brightness, such as a red coat against green grass, they will merge in black and white. Look at the preview before committing.
Other photo filters worth knowing
Image Filters has 14 presets: Original, Vivid, Pop, Warm, Cool, Vintage, Sepia, B&W, Noir, Dramatic, Faded, Dreamy, Punch and Invert. For an old-photograph look, Sepia gives a brown-toned image instead of neutral grey, and Vintage combines partial sepia with lower contrast and saturation.
One thing to know: the Grayscale slider is applied after Sepia, so setting Grayscale to 100 removes any brown tone. For a warm monochrome, use the Sepia preset on its own and leave Grayscale at 0.
The tool has no channel mixer, which is the control that lets you darken skies or lighten skin by choosing how much each color contributes to the grey. If you need that level of control, a desktop photo editor is the right tool. For most photos, grayscale plus contrast is enough.
Black and white for one part of a design
Filters apply to the whole image in Image Filters. In the Image Editor, adjustments belong to a single layer. Add a photo as a layer, pick the B&W or Noir preset in its Adjustments section, and any other layer keeps its own look. That lets you put colored text over a black and white photo, or place a color logo on a grey background image, then export as PNG, JPG or WebP.
For a full edit before converting, see how to edit photos. It is easier to fix exposure and crop while the photo is still in color.
Saving the result
Use JPG at a quality around 90 for photos you will share or print. Use PNG if the image contains text or will be edited again, since it is lossless. WebP gives the smallest file for a website. More photo tools are in the images category.
Try it
Drop a photo into Image Filters, click the B&W preset, nudge Contrast until the blacks and whites look right, and hold the compare button to check against the original. Then download it as JPG, PNG or WebP.