LinkedIn Banner Size: Profile and Company Page Guide
The recommended LinkedIn banner size is 1584x396 pixels for a personal profile and 1128x191 for a company page. See the safe area and how to resize an image.
Updated
LinkedIn's long-standing recommendation for a personal profile banner, which it calls the background photo, is 1584 x 396 pixels, a 4:1 shape. A company page cover image is a different size, commonly documented as 1128 x 191 pixels. LinkedIn revises its layout now and then, so treat these as recommended sizes and check LinkedIn Help when exactness matters.
Personal profile vs company page
The two banners are not interchangeable. They have different shapes, and different things sit on top of them.
| Banner | Recommended size | Shape (width divided by height) |
|---|---|---|
| Personal profile background photo | 1584 x 396 pixels | 4:1 |
| Company page cover image | 1128 x 191 pixels | About 5.9:1 |
A personal banner is four times as wide as it is tall. A company cover is nearly six times as wide as it is tall, a much thinner strip. If you crop a personal banner down to the company shape, you lose about a third of its height. Plan a separate file for each.
LinkedIn accepts JPG and PNG for the profile background photo, and its help page has listed a file size limit of 8 MB. You will not get near that with a correctly sized banner.
What gets covered: the safe area
LinkedIn does not publish a pixel-exact safe zone, and the overlays move with screen width. What is consistent is where the trouble comes from.
On a personal profile:
- The round profile photo overlaps the lower left of the banner. On a desktop browser it covers a patch near the left edge. On the mobile app the photo is proportionally larger and covers more.
- Narrow windows and phones scale the banner down and may trim the outer edges slightly.
On a company page:
- The square logo sits over or just below the lower left of the cover.
- The strip is so thin that any text must be large and short to be legible at all.
A layout that holds up on every screen so far:
- Keep the lower left quarter free of text, faces and logos.
- Put your name, tagline or key visual in the right half, or centered.
- Leave a margin of roughly 10 percent of the height at the top and bottom, and a similar margin at the right edge.
- Check the result on your phone after uploading. That is the view most likely to surprise you.
On a 1584 x 396 banner, a simple working version is to treat the left 500 pixels or so as background only and place content from there to about 1480 pixels across. This is a rule of thumb, not an official measurement.
How to crop and resize an image to 1584x396
A typical photo is 4:3 or 3:2, far taller than a banner. You have to crop away most of the height, then scale to exact pixels. The cropper on this site has presets for 1:1, 16:9, 4:3, 3:2, 2:3 and 9:16, but not 4:1, and the resizer has no LinkedIn preset, so use the free crop mode and type the size.
- Open the Image Cropper and drop in your image. Leave the aspect setting on free.
- Drag the crop box into a wide strip. The selection size is shown in pixels while you drag. Aim for a width four times the height, for example
3168 x 792or2400 x 600. - Download the crop.
- Open the Image Resizer and drop in the cropped file.
- With the aspect ratio lock on, type
1584in the width field. The height should come out at396or within a few pixels of it. - If it is slightly off, unlock the ratio and type
396. A difference of a few pixels is not visible. - Choose JPEG for a photo or PNG for a graphic with text, then download.
For a company page, do the same with a thinner strip: crop to a width about 5.9 times the height, then resize to 1128 x 191.
The working out for any target is the same division. Target height equals width divided by the ratio: 1584 / 4 = 396. To find how tall a crop should be for a source of a given width, divide by the same number: a photo 4000 pixels wide gives a 4000 x 1000 banner crop. More on this in aspect ratio explained.
Choosing a source image that survives the crop
Because you are keeping only a thin horizontal slice, most photos lose their subject. Images that work well as banners share a few traits:
- The interest runs horizontally: a skyline, a desk seen from the front, a row of products, a texture or pattern.
- There is empty or simple space on the left, where the profile photo will sit.
- The image is at least
1584pixels wide before cropping. Upscaling a small image to banner width makes it soft, and LinkedIn's own compression makes it softer.
If you are building the banner from a solid color or a gradient with text, design it at exactly 1584 x 396 or at double that, 3168 x 792, and scale down.
Format and quality
LinkedIn recompresses uploaded banners. Two habits keep the result clean:
- Upload at the recommended size or an exact multiple of it, not a little larger or smaller. Odd sizes are resampled, which blurs fine text.
- Use PNG for banners that are mostly flat color and text, and JPG at a quality of 85 to 90 for photos. If a PNG photo comes out at several megabytes, switch to JPG or run it through the Image Compressor.
Text is the first thing to suffer. Keep the type large: on a 1584 x 396 banner, letters shorter than about 30 pixels are hard to read once the banner is scaled down for a phone.
Related header sizes
Other networks follow the same crop and resize pattern with different numbers and different overlays. The Twitter header size guide covers the 3:1 header on X, and the Facebook cover photo size guide covers the desktop and mobile crops there. More image tools are in the images category.
Try it
Crop a wide strip in the Image Cropper, then type 1584 and 396 into the Image Resizer and export. Keep the lower left clear for your profile photo, and check the banner on a phone once it is live.