Minesweeper Patterns: 1-1, 1-2, 1-2-1 and 1-2-2-1 Explained
The Minesweeper patterns worth memorizing: 1-1, 1-2, 1-2-1, 1-2-2-1 and corners, each shown as a text grid with the reason it works, plus when you must guess.
Updated
Minesweeper patterns are arrangements of numbers that always have the same solution, so you can play them on sight instead of working them out. The four to learn first are 1-1 (the square past the second 1 is safe), 1-2 (the square past the 2 is a mine), 1-2-1 (mines beside the 1s) and 1-2-2-1 (mines beside the 2s).
How to read the grids
Each grid below shows a row of hidden squares sitting on top of a row of revealed clues, the situation you meet along every border. ? is a hidden square and open is any revealed square. The columns are lettered so the text can refer to "hidden C". A clue touches the hidden square in its own column and the ones in the columns on either side.
The same patterns work rotated or mirrored: the hidden wall can be above, below, left or right of the clues. They assume the squares on the other side of the clues are already revealed.
New to the game? Start with how to play Minesweeper.
The idea behind every pattern
All of these are one piece of logic. When every hidden square touched by clue X is also touched by clue Y, then Y's extra squares must hold exactly the difference between the two numbers. If the difference is zero, the extra squares are safe. If the difference equals the number of extra squares, they are all mines. Keep that in mind and you can rebuild any pattern you forget.
1-1: the far square is safe
This one needs the board edge, or a revealed square, to cut off the first 1.
| A | B | C | |
|---|---|---|---|
| Hidden | ? | ? | ? |
| Clues | 1 | 1 | open |
| Result | ? | ? | safe |
Column A is the left edge of the board. The 1 in column A touches only hidden A and B, so its single mine is in one of those two. The 1 in column B touches hidden A, B and C. Its one mine is already accounted for inside A and B, so hidden C is safe.
1-2: the far square is a mine
| A | B | C | D | |
|---|---|---|---|---|
| Hidden | ? | ? | ? | ? |
| Clues | open | 1 | 2 | open |
| Result | safe | ? | ? | mine |
The 1 touches hidden A, B and C. The 2 touches hidden B, C and D. The 2 needs two mines, but B and C can hold at most one between them because both touch the 1. The second mine has to be D. That in turn means B and C hold exactly one mine, which uses up the 1, so hidden A is safe.
This pattern does not need an edge, which is why it turns up constantly.
1-2-1: mines beside the 1s
| A | B | C | D | E | |
|---|---|---|---|---|---|
| Hidden | ? | ? | ? | ? | ? |
| Clues | open | 1 | 2 | 1 | open |
| Result | safe | mine | safe | mine | safe |
It is the 1-2 pattern applied from both sides. Reading left to right, the 1 in B and the 2 in C force a mine at D. Reading right to left, the 1 in D and the 2 in C force a mine at B. The 2 now has both of its mines, so hidden C is safe, and each 1 has its mine, so A and E are safe too.
1-2-2-1: mines beside the 2s
| A | B | C | D | E | F | |
|---|---|---|---|---|---|---|
| Hidden | ? | ? | ? | ? | ? | ? |
| Clues | open | 1 | 2 | 2 | 1 | open |
| Result | safe | safe | mine | mine | safe | safe |
Again use 1-2 from each end. The 1 in B and the 2 in C force a mine at D. The 1 in E and the 2 in D force a mine at C. Each 1 touches one of those mines, so every other hidden square next to a 1 is safe: A, B, E and F.
An easy way to keep the two long patterns apart: in 1-2-1 the mines are next to the 1s, in 1-2-2-1 they are next to the 2s.
Corners
A corner pattern is a clue with only one hidden neighbor. It is the simplest case of all, but people overlook it because the hidden square is on a diagonal.
| A | B | |
|---|---|---|
| Row 1 | ? | 1 |
| Row 2 | 1 | 1 |
Here A1 is the last hidden square in this area. The 1 at B2 touches it only diagonally, and it is the only hidden square that clue touches at all, so A1 is a mine. The general rule: when a number equals the count of hidden squares around it, they are all mines, even if there is just one.
Reduce first, then look for patterns
Real boards rarely show a clean 1-2-1. They show a 2-4-2 with flags nearby. Subtract the flagged mines each clue already touches and read what is left.
- A 3 touching one flag behaves like a 2.
- A 2 touching one flag behaves like a 1.
- A 4-3 pair where each touches two flags that are not part of the hidden wall is really a 2-1, which is the 1-2 pattern.
Once you reduce numbers in your head, the four patterns above cover most of the border on Intermediate and Expert boards.
When you must guess
Some positions cannot be solved by logic. The classic one:
| A | B | |
|---|---|---|
| Row 1 | ? | ? |
| Row 2 | 1 | 1 |
A1 and B1 sit in a corner of the board with everything around them revealed. Both clues touch both hidden squares, so the numbers say only "one mine in these two". No pattern separates them. It is a true 50/50.
Before you accept a guess, check three things:
- Count the mines left. If the counter says the remaining mines equal the remaining hidden squares, they are all mines. If it says zero are left over once the known ones are counted, the rest are safe.
- Look for a clue on the far side of the group that touches only one of the squares.
- Ask whether clearing another part of the board could ever reveal a new clue next to these squares. If it can, leave them for later. If it cannot, guessing now costs nothing extra.
How to pick the better square when a guess is forced is covered in the Minesweeper strategy guide.
Try it
Open Minesweeper on Intermediate and scan the border for a 1 next to a 2: flag the square past the 2 and dig the square past the 1. Right click or long-press to flag, then click a satisfied number to chord. The patterns show up within the first minute of almost every Minesweeper game.