GameParticles
Numbers & units

How to Calculate Percentage Change, Including Negatives

How to calculate percentage change with the percent change formula, what to do with negative or zero starting values, and percentage points versus percent.

Updated

Percentage change is the difference between a new value and an old value, expressed as a share of the old value: change % = (new − old) ÷ old × 100. A positive answer means the value rose and a negative answer means it fell. Going from 200 to 170 is (170 − 200) ÷ 200 × 100 = −15%, a 15% drop.

The percent change formula

  1. Subtract the old value from the new value. Keep the sign.
  2. Divide by the old value.
  3. Multiply by 100.

The order of subtraction matters. New minus old gives a positive number for growth and a negative number for decline, so one formula covers both directions. That is the difference from a plain increase calculation, which assumes the value went up. If you only need the upward case with salary and price examples, see how to calculate percentage increase.

OldNewCalculationPercent change
200170−30 ÷ 200 × 100−15%
17020030 ÷ 170 × 100+17.65%
1,2501,400150 ÷ 1,250 × 100+12%
6448−16 ÷ 64 × 100−25%
0.81.00.2 ÷ 0.8 × 100+25%
90900 ÷ 90 × 1000%

Why the direction matters

The first two rows of the table use the same pair of numbers and give different answers. A fall from 200 to 170 is 15%, but climbing back from 170 to 200 takes 17.65%. Percent change is not symmetric, because the baseline changes with the direction.

This has practical consequences. A portfolio that loses 50% needs a 100% gain to recover. A price cut of 20% followed by a rise of 20% leaves the price 4% lower than where it began, because 0.80 × 1.20 = 0.96.

Always say which value is the baseline. "Sales changed 15%" is ambiguous. "Sales fell 15% from the first quarter" is not.

Negative starting values

The formula misbehaves when the old value is negative. Suppose a company's profit goes from −50 to 20, a clear improvement of 70. Plugging in gives (20 − (−50)) ÷ (−50) × 100 = −140%. The sign is wrong, because dividing by a negative baseline flips it.

The usual fix is to divide by the absolute value of the old number:

change % = (new − old) ÷ |old| × 100

Now the result is 70 ÷ 50 × 100 = +140%, and the sign matches the direction of the move. More examples:

  • From −50 to −20: 30 ÷ 50 × 100 = +60%. The loss shrank.
  • From −20 to −50: −30 ÷ 20 × 100 = −150%. The loss grew.
  • From 10 to −5: −15 ÷ 10 × 100 = −150%. Positive baseline, so the standard formula already works.
When a value crosses zero, a percentage can be technically correct and still mislead. "Profit rose 140%" sounds like profit more than doubled, when it actually went from a loss to a small gain. In those cases give the two raw figures and the absolute change alongside any percentage, or leave the percentage out.

When the old value is zero

There is no percentage change from zero. The formula would divide by zero, which is undefined. Going from 0 customers to 500 is not "infinite percent" in any useful sense. Report the absolute change, or describe the figure as new. If the old value is very small rather than exactly zero, the percentage will be enormous and equally unhelpful: from 2 sign-ups to 60 is +2,900%.

Percentage points versus percent

When the quantity that changes is itself a percentage, there are two ways to describe the move, and they produce very different numbers.

  • Percentage points are the plain subtraction of one percentage from another.
  • Percent change is the relative change, using the percent change formula on the two rates.

An interest rate that rises from 4% to 5% has gone up by 1 percentage point. In relative terms it has risen by (5 − 4) ÷ 4 × 100 = 25%. Both statements are true. Saying "rates rose 1%" is ambiguous and usually wrong.

ChangePercentage pointsPercent change
Interest rate 4% to 5%+1 point+25%
Unemployment 6% to 4.5%−1.5 points−25%
Conversion rate 2% to 3%+1 point+50%
Approval rating 40% to 44%+4 points+10%
Tax rate 20% to 22%+2 points+10%

Finance uses a smaller unit for the same idea. One basis point is one hundredth of a percentage point, so a rate move from 4.25% to 4.50% is 25 basis points.

A good rule: use percentage points for the gap between two rates, and reserve percent for relative change. If a headline says a tax "increased by 2%", check whether the rate went from 20% to 22% or from 20% to 20.4%.

Change, difference or error

Percentage change needs a before and an after. If you are comparing two values that have no time order, such as two shops' prices for the same item, neither one is the baseline, and the right tool is the percentage difference formula, which divides by the average of the two. That guide also covers percent error, used when one value is a measurement and the other is the accepted figure.

Using the calculator

The Percentage Calculator has a panel labelled "Percentage change from X to Y". Enter the old value in the From box and the new value in the To box. Increases show in green and decreases in red with a minus sign.

The panel applies the standard formula and divides by the From value as entered. For a negative starting value, that means the sign comes out reversed, as in the −50 to 20 example above. Read the size of the number from the calculator and set the sign yourself: positive if the value went up, negative if it went down. A From value of zero has no valid result.

To get a percentage point gap, simply subtract the two rates. To get the relative change between two rates, enter them in the change panel without the percent signs: From 4, To 5 returns 25%.

Related percentage guides

Try it

Open the Percentage Calculator and enter 200 and 170 in the change panel to see −15%, then swap them to see why the trip back is 17.65%.

Tools in this guide

Frequently asked questions

What is the percent change formula?

Percent change = (new value − old value) ÷ old value × 100. A positive result is an increase and a negative result is a decrease. From 200 to 170 is (170 − 200) ÷ 200 × 100 = −15%.

How do you calculate percentage change with negative numbers?

Divide by the absolute value of the old number: (new − old) ÷ |old| × 100. From −50 to 20 is 70 ÷ 50 × 100 = +140%. If the sign flips between the two values, the percentage is hard to interpret, so report the absolute change as well.

What is the difference between percentage points and percent?

Percentage points measure the simple gap between two percentages. Percent measures relative change. A rate that moves from 4% to 5% rises by 1 percentage point, which is a 25% increase in the rate.

What is the percentage change from zero?

It is undefined, because the formula divides by the old value and division by zero has no answer. Growth from 0 to 500 cannot be expressed as a percent. Report the absolute change, or call the value new.

More numbers & units guides

JSON Formatter
Developer · Format, validate and minify JSON with syntax highlighting.
↵
Base64 Encode / Decode
Developer · Encode text to Base64 or decode Base64 back to plain text.
↵
URL Encoder / Decoder
Developer · Encode or decode URL components and query strings.
↵
Hash Generator
Developer · Generate MD5, SHA-1, SHA-256 and SHA-512 hashes.
↵
UUID Generator
Developer · Generate UUIDs v4 (random) in bulk with one click.
↵
Regex Tester
Developer · Test regular expressions against text with live match highlighting.
↵
Word Counter
Text · Count words, characters, sentences, paragraphs and reading time.
↵
Case Converter
Text · Convert text between UPPER, lower, Title, camelCase, snake_case and more.
↵
List Sorter
Text · Sort, reverse, deduplicate and shuffle lists of text.
↵
Markdown Preview
Text · Write Markdown and see a live rendered preview side by side.
↵
Percentage Calculator
Numbers · Calculate percentages, increases, decreases and what % one number is of another.
↵
Color Converter
Colors · Convert colors between HEX, RGB, HSL and HSV instantly.
↵
Snake
Arcade · Eat food, grow longer, don't hit the walls. A timeless classic.
↵
2048
Puzzle · Slide tiles and combine them to reach the legendary 2048 tile.
↵
Word Grid
Puzzle · Guess the hidden five letter word in six tries using color clues.
↵
Sudoku
Puzzle · Fill the 9x9 grid with logic. Four difficulties from easy to expert.
↵
Minesweeper
Strategy · Use number clues to clear the minefield. Classic logic, three levels.
↵
Breakout
Arcade · Smash every brick with paddle and ball. Power-ups, combos, endless levels.
↵
Typing Practice
Casual · Build your WPM and accuracy with timed drills from 30 seconds to 5 minutes. Find your weak keys.
↵
TypeRunner
Arcade · Multiplayer typing race. Race friends by link, beat computer runners, or chase your own ghost.
↵
Typing Blocks
Arcade · Type each word before its wooden block lands. Miss, and the pile climbs toward the line.
↵
Bubble Shooter
Arcade · Aim, bank shots off the walls, and pop groups of three or more bubbles.
↵
Road Rush
Arcade · Race seven rivals through traffic and punch your way to the front.
↵