How to Calculate Percentage Increase: Formula and Examples
How to calculate percentage increase: subtract the old value from the new, divide by the old value and multiply by 100. Worked salary, price and rent examples.
Updated
To calculate percentage increase, subtract the old value from the new value, divide the result by the old value, and multiply by 100: increase % = (new − old) ÷ old × 100. A price that rises from 50 to 65 has gone up by 15 ÷ 50 × 100 = 30%. The old value always goes on the bottom, because it is the baseline the growth is measured against.
The formula step by step
- Find the increase: new value minus old value.
- Divide the increase by the old value.
- Multiply by 100 and add the percent sign.
There is an equivalent shortcut that skips the subtraction: divide new by old, subtract 1, then multiply by 100. For 50 to 65, 65 ÷ 50 = 1.3, minus 1 is 0.3, which is 30%. Both routes give the same answer; use whichever is quicker on your calculator.
Worked examples
Salary raise. Your pay goes from 52,000 to 55,120 a year. The increase is 3,120. 3,120 ÷ 52,000 = 0.06, so the raise is 6%.
Price rise. A coffee goes from 3.20 to 3.68. The increase is 0.48. 0.48 ÷ 3.20 = 0.15, so the price rose 15%.
Rent. Rent goes from 1,400 to 1,540 a month. The increase is 140. 140 ÷ 1,400 = 0.10, a 10% increase.
Website traffic. Visits go from 8,000 to 20,000. The increase is 12,000. 12,000 ÷ 8,000 = 1.5, a 150% increase. The traffic is 2.5 times what it was, which is not the same statement as "up 250%".
| Old value | New value | Increase | Percentage increase |
|---|---|---|---|
| 50 | 65 | 15 | 30% |
| 52,000 | 55,120 | 3,120 | 6% |
| 3.20 | 3.68 | 0.48 | 15% |
| 1,400 | 1,540 | 140 | 10% |
| 8,000 | 20,000 | 12,000 | 150% |
| 40 | 80 | 40 | 100% |
Increases above 100%
An increase of 100% means the amount added equals the starting amount, so the value has doubled. People often mix up "increased by" and "increased to":
| The value is now | Multiplier | Percentage increase |
|---|---|---|
| 1.5 times the original | 1.5 | 50% |
| Double | 2 | 100% |
| Triple | 3 | 200% |
| Four times | 4 | 300% |
| Ten times | 10 | 900% |
The rule: subtract 1 from the multiplier and multiply by 100. Tripling is a 200% increase, not 300%.
Applying an increase to a number
Sometimes you know the percentage and need the new value. Multiply the old value by 1 + rate ÷ 100.
- A 4% raise on 60,000:
60,000 × 1.04 = 62,400. - A 7.5% price rise on 120:
120 × 1.075 = 129. - A 25% markup on a 36 dollar cost:
36 × 1.25 = 45.
The multiplier form is also the cleanest way to chain increases. Two raises of 5% in a row give 1.05 × 1.05 = 1.1025, a total increase of 10.25%, not 10%. Three years of 5% growth give 1.05 × 1.05 × 1.05 = 1.157625, or about 15.76%. Each rise applies to an already larger base, which is why repeated increases compound.
Finding the original value
If you know the value after the increase and the rate, divide by the multiplier instead of multiplying. A salary of 62,400 after a 4% raise was 62,400 ÷ 1.04 = 60,000 before it.
Do not subtract the percentage from the new value to get back to the old one. 4% of 62,400 is 2,496, and 62,400 minus 2,496 is 59,904, which is wrong. The 4% was measured on the old salary, so you have to divide.
Percent decrease uses the same formula
When the new value is lower, the subtraction gives a negative number and so does the result. A stock that falls from 80 to 60 has changed by (60 − 80) ÷ 80 × 100 = −25%, which you would report as a 25% decrease.
Increases and decreases of the same percentage do not cancel:
- A 20% rise followed by a 20% fall leaves you at
1.20 × 0.80 = 0.96, which is 4% below the start. - After a 50% fall, it takes a 100% rise to get back to the original value.
- After a 20% fall, it takes a 25% rise to recover.
The reason is the baseline. The fall is measured on the higher value and the rise on the lower one, so the same percentage stands for a different amount each time. When direction matters or you are comparing rates, the guide on how to calculate percentage change covers the signed version in detail.
Common mistakes
- Dividing by the new value. From 50 to 65,
15 ÷ 65gives 23.1%, which answers a different question: what share of the new price is the rise. Divide by the old value. - Confusing "percent of" with "percent increase". 65 is 130% of 50, and it is a 30% increase on 50. Both are correct, but they are not interchangeable.
- Adding percentages across periods. Two 10% increases make 21%, not 20%.
- Reporting an increase from zero. Division by zero is undefined, so growth from 0 to any number has no percentage. State the absolute change instead.
Using the calculator
In the Percentage Calculator, the third panel is "Percentage change from X to Y". Put the old value in the From box and the new value in the To box. An increase appears in green and a decrease appears in red with a minus sign, and the result can be copied with one click.
To apply an increase rather than measure one, use the first panel, "What is X% of Y?". For a 4% raise on 60,000, enter 104 and 60,000 to get 62,400 directly, or enter 4 and 60,000 to see the raise alone, 2,400.
Related percentage guides
- New to the basics: how to calculate percentage.
- Comparing two values with no clear starting point: the percentage difference formula.
- Working out a sale price: how to calculate percent off.
Try it
Open the Percentage Calculator, enter 52000 and 55120 in the percentage change panel, and confirm the result is 6%.